![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Just a small request from the AU fraternity (sp?)....
Anyone running Pacemaker headers (PH4480 or PH4499), can you please post pics? I got some opinions about my ute, and just wanna see what everyone elses looks like. Edit - Reason being is I wanna see the space the headers take up, and if I need to move my LPG converter to another spot...
__________________
Carless
Last edited by TheSneakiness; 14-06-2005 at 07:36 PM. Reason: Cause I'm blonde... |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Lake Macquarie, Newcastle NSW
Posts: 3,164
|
go to this threadto see as to what they look like unfitted.( These are the PH4480 )
http://www.fordforums.com.au/showthread.php?t=10194 |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
heres mine
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Mice colour too!!
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again ![]() |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
Actually its the standard pacemaker colour. Not really my idea.
Its now als getting the mottled brown rust spots that seems to affect all pacies tooo : ( |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Thanks for that jonbays, that's what I was looking for.
And yes, I will have to move the gas converter, looking at that. F*ck. Edit - jonbays, what's the length of the pipe I put a yellow line on? I *may* be able to get away with not moving it... ![]()
__________________
Carless
Last edited by TheSneakiness; 15-06-2005 at 09:46 AM. |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
OK no. 4 pipe comes out from the exhaust cyl head face 22cm and actually goes up 2cm above the line of the exhaust bolt.
Its going to be a big problem I would think. |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
Yea, that would smack right into the bottom/side of the Vialle convertor because those Vialle suckers are 3 inches wide
__________________
|
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Is that what my converter is Racecraft?
Keep in mind it is aftermarket. Edit - Found a pic. Don't worry about the black circle. The converter is on the left under the coolant container. I will take a better picture tomorrow morning. ![]()
__________________
Carless
Last edited by TheSneakiness; 15-06-2005 at 05:58 PM. |
||
![]() |
![]() ![]() |
![]() |
#10 | ||
Regular Member
Join Date: Jun 2005
Location: Amsterdam
Posts: 32
|
yeh i have the same sort of setup as you except my gas convertor thingy is back more and probably a lil higher.. its more sorta situated behind the radiator resevoir, i think im just gonna be able to get away with it.. i think... by looking at the pics you guys have posted im pretty sure i should be able to to it..
|
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
OK. I went and took some more pics. And yes, my damn converter will get in the road. It's fuggin huge.
![]() ![]() ![]()
__________________
Carless
|
||
![]() |
![]() ![]() |
![]() |
#12 | ||
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
ahh you have an OMVL convertor, they are 1/2 the size of the factory vialle convertors..
Easy enough to move it though, get the headers fitted and then find a new home for the gas convertor
__________________
|
||
![]() |
![]() ![]() |
![]() |
#13 | ||
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Sounds like a plan. But ideally I want to move the convertor first and then put the headers in, just in case I need extra length on some pipes, etc...
__________________
Carless
|
||
![]() |
![]() ![]() |
![]() |
#14 | ||
Mopar/No Car
Join Date: Jan 2005
Location: Down the Obi..
Posts: 4,648
|
There's so much length in those pipes, would be a piece of **** to move it up and back behind the coolant reservoir. If you were super-keen, you could probably fab up a neat bracket and cover for it too.
Tibbo - are there any considerations when relocating a convertor? Do they need to sit level or be on a certain angle or orientation or anything? I know they need to be kept away from heat as much as possible...
__________________
ColumnShift Media '72 Plymouth Scamp '80 Courier '13 Kawasaki ZX14-R '13 Berlina '92 Suzuki DR650 If you don't fight - You lose
Last edited by GreenMachine; 16-06-2005 at 02:19 PM. Reason: Nobody's perfect |
||
![]() |
![]() ![]() |
![]() |
#15 | |||
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Quote:
__________________
Carless
|
|||
![]() |
![]() ![]() |
![]() |
#16 | ||
Moderator
![]() ![]() Join Date: Feb 2005
Location: Kenthurst
Posts: 40,394
|
I couldn't get the Pacies fitted cos the factory converter was in the way .... so I just have a cat back system on ... damn ... I'd love to get a set of Pacies though on the ute.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
![]() |
![]() ![]() |