|
04-01-2014, 12:04 PM | #1 | ||
AUII XR8
Join Date: Jul 2006
Location: You don't need to know
Posts: 912
|
Hi all,
I recently removed the engine oil cooler on my series 2 xr8 to degrease it and remove the gunk built up in there. Does anyone know on the oil cooler which fitting the long cooler line goes to on the engine oil sandwich block. Any help is greatly appreciated. Thanks Brett
__________________
Ford XR8 AUII Sedan, 5.6L Stroker Engine 250kw. |
||
04-01-2014, 03:41 PM | #2 | |||
AU DIE HARD
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
|
Runs outside too look
Drivers side hose goes to top of plate at filter
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .................................................. Quote:
Last edited by Whoosha; 04-01-2014 at 03:46 PM. |
|||
This user likes this post: |
04-01-2014, 03:44 PM | #3 | ||
Stay Classy ™
Join Date: Apr 2005
Location: Sydney
Posts: 2,044
|
It shouldn't matter, the oil can go in either end of the cooler and the flow will be dictated by the sandwich plate anyway.
|
||
This user likes this post: |
06-01-2014, 08:21 PM | #4 | ||
AUII XR8
Join Date: Jul 2006
Location: You don't need to know
Posts: 912
|
Thanks guys.
__________________
Ford XR8 AUII Sedan, 5.6L Stroker Engine 250kw. |
||