|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
01-03-2015, 10:01 AM | #1 | ||
Regular Member
Join Date: Jan 2015
Posts: 30
|
Hi, I want to do a trans flush, so I need to disconnect the line where the fluid comes out of the trans cooler. There are 2 lines from the trans to the cooler, one to the bottom of the cooler and the other to the top of the cooler.
Does the fluid go in the bottom and out the top? or in the top and out the bottom? Any help greatly appreciated, as it doesn't say in the workshop manual.
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto |
||
01-03-2015, 12:31 PM | #2 | ||
FG XR6 Ute & Sedan
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,387
|
test by touch after you have driven it; there will be a noticeable difference in temperature; the incoming line will be hotter. Also if it goes through the radiator, as well it will be designed to go through the radiator before the trans cooler; i.e. the one going from the radiator to the trans cooler will be the incoming line.
__________________
regards Blue |
||
01-03-2015, 05:42 PM | #3 | ||
Regular Member
Join Date: Jan 2015
Posts: 30
|
Good idea...the trans cooler has 4 hoses on it 2 from the gearbox and 2 from the radiator, not really sure how it all works, so ill give your first method a try...cheers
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto |
||
01-03-2015, 05:57 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,858
|
cold water from the radiator flows through the cooler - it is independent of the radiator, so ignore those two lines.
|
||
02-03-2015, 08:26 PM | #5 | ||
Regular Member
Join Date: Jan 2015
Posts: 30
|
Tried the test...felt slightly colder on the bottom hose...then someone replied to another post I started on a uk ford site saying they had just done a flush themselves and it was the bottom hose that you take off... cheers
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto |
||
02-03-2015, 08:46 PM | #6 | ||
FG XR6 Ute & Sedan
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,387
|
You usually do the flush where the line enters cooler so you don't have the flow restriction imposes by the cooler; well at least with most cars.
__________________
regards Blue |
||