![]() |
|
![]() |
#1 | ||
Regular Member
Join Date: Aug 2005
Posts: 32
|
Just like that it stopped working.
Either pressing the button on the remote or pressing the release on the panal it doesnt want to open. The indicator lights flash which tells me some signal is happening. Could it be a fuse or could it be the actual mechinism? Manual release works. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
I would guess the actual solenoid is dead, or the plug has disconnected or possibly dirty.
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Regular Member
Join Date: Aug 2005
Posts: 32
|
At which end?? The actualy boot end or at the dash?
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
boot end, should be in the boot lid, behind the carpet on the back bit.
you will work out which bit it quick enough, they are a simple 12volt device, so jump some power to it and see if it works. With the boot open try the button does it go click at all ?
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
![]() |
![]() ![]() |