|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link |
|
Thread Tools | Display Modes |
14-04-2013, 09:29 PM | #211 | ||
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
Yeh sure can, I ran a set of KMC's before my current setup - front offset between +36 to +20 should be fine, rear's +40 to +38 should be fine. No rolling required, my car was lowered..
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
||
15-04-2013, 09:12 AM | #212 | ||||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
Quote:
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||||
15-04-2013, 04:45 PM | #213 | ||
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
||
15-04-2013, 04:56 PM | #214 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
Very Nice
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
06-05-2013, 06:48 PM | #215 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Posts: 1,057
|
My latest circuit wheels.
18 x 9.5 +22 all round. SSR Type C, clear by miles. https://www.google.com.au/search?q=s...w=1440&bih=663
__________________
FG XR6T ZF 350,000kms+ Road registered Lap record holder at Wakefield for any Ford or 2wd 4 door, of any make.....ever!! Wakefield 1.07.4 SMP GP 1.48.1 Marulan 43.4 Winton 1.35.4 |
||
12-05-2013, 11:19 PM | #216 | ||
Pro Street Au Ute
Join Date: Apr 2008
Location: Rocky QLD
Posts: 1,150
|
I would like to know to if roh modena 3 piece fit 19 and 20. And also koya vizzo 20x8.5f and 20x10r will fit 6f and 4r brembos.
__________________
Daily. AU XR8 s2 ute auto Weekender. AU XR8 s2 sedan. 427 windsor, t56 magnum. 3.9 locker. |
||
13-05-2013, 11:50 AM | #217 | ||
Regular Member
Join Date: Jan 2010
Posts: 369
|
Koya Vizzo will not clear.
ROH Modena 3 piece are a Modular wheel made to order so they can make them to clear Brembos, however, you won't get much dish on them (which is like most wheels with Brembo clearance).
__________________
www.thewheeldeal.com.au
Australias' best deals on tyres & wheels FordForums Discount Coupon Code: 4rd4rum |
||
14-05-2013, 10:26 AM | #218 | ||
Member
Join Date: Mar 2005
Location: Hobart, Tasmania
Posts: 1,991
|
My ROH Moden in 19" do not fit, but as above, you could get them specified to fit. Essentially, if they have dish, then they are unlikely to fit.
__________________
Current vehicles: MY12 Land Rover Discovery 4 TDV6, MY03 Land Rover Discovery 2 HSE Td5 off road modified and 1989 Mazda NA MX-5 toy car. Previously: 1992 Ford EBII Fairmont, 1994 Ford EF Falcon XR6 supercharged, 2003 Ford BA Falcon XR6 Turbo 325rwkw, and 2002 Ford AU3 Falcon XR8 Pursuit 250 270rwkw. |
||
14-05-2013, 11:28 AM | #219 | ||
GT-P With An Ego
Join Date: Feb 2005
Location: Canberra
Posts: 20,845
|
You can get wheels with what I call 'fake dish', the spokes curl inwards at the very ends, so you get some lip on the rim, but the spokes are still spaced out far enough for caliper clearance.
e.g. like the Speedy Inferno's I run.
__________________
1998 DL LTD in Sparkling Burgundy, daily, mild 5.0L, high end stereo, slow'n'thirsty - 138.8rwkw. 2006 BF GT-P in Ego, 5.8L all alloy, Kenne Bell 2.8HLC, Nizpro Stage 2 ZF - 440rwkw. 2008 SY F6X in Silhouette, Ford Performance Club of ACT |
||
19-05-2013, 02:09 PM | #220 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: NSW
Posts: 716
|
Interesting thread. I see only 1 Ford factory wheels that fit over brembo's which are the BA XR8 18's. Does anyone else which other Ford Factory wheels fit..... EG FG 50th, G6E 19's etc etc.
|
||
19-05-2013, 02:30 PM | #221 | ||
Matakana NZ
Join Date: Aug 2005
Location: Matakana NZ
Posts: 3,669
|
Nope none, unless you now call factory FPV's Ford
__________________
SOLD : BA XR8 4 Speed Auto in Mercury Silver, Bluepower CIA, Full Diffilipo Big Boy Quad System, Tune, 4.11 Diff Gears, FPV Starter Button, FPV GT Rear Spoiler, Tripod Gauges, PWR Trans Cooler. 230 RWKW's. Many thanks to Chris at Bluepower Racing Developments
Hers : F6X build #150 in Ego, Stock as a Rock, untill the warranty runs out, including the extended one. My Work Wagon AU Futura Wagon in Gold. On the Farm : Ford 6600 Tractor |
||
This user likes this post: |
14-07-2013, 02:37 PM | #222 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Fremantle W.A
Posts: 661
|
Well unfortunately for me I can confirm that Koya Inox Kahn do not fit Brembo brakes , thanks to
a forum member who was good enoughf to let me try them on his Bremboed AU XR8 My wheels are 20x8.5 on the front and a lovely 20x10 on the rear. Off set I'm pretty sure was 38 for both fronts and rears I read here post 69 that they do fit http://www.fordxr6turbo.com/forum/to...-wheels/page-2 TBO I havent seen too many wheels I like that will clear, maybe the BF Cobra one are pretty good.Front foul up by about 12mm and after that we didn't even bother trying the dished out rears. Such a shame to get rid of these
__________________
Losing my patients with unfinished threads Did the ideas people helped you with work or not! |
||
14-07-2013, 04:08 PM | #223 | ||
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
Uploaded with ImageShack.us
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
||
15-07-2013, 08:42 AM | #224 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
That is a bugger but its the dished wheels that cause the most grief unfortunately.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
15-07-2013, 06:44 PM | #225 | ||
Sneaky
Join Date: Feb 2013
Location: Little Old Adelaide
Posts: 985
|
These are a 19" FPV rim, just put std centre caps to keep away the dishonest.
From reading this thread i've come to believe, i can definitely put 4/4 330mm, is it going to be of significant benefit to fit 355mm fronts? Please correct me if i'm wrong. [IMG][/IMG] I was suggested to run AP Racing discs and calipers 4/4 with a set of EBC red pads. Then i started to see some prices and fell off my chair...... the pads i will hopefully use, but any suggestions as to a reasonable priced set of rotors and calipers that work as good as AP Racing? Ben
__________________
|
||
15-07-2013, 07:32 PM | #226 | ||
GT-P With An Ego
Join Date: Feb 2005
Location: Canberra
Posts: 20,845
|
Good brakes aren't cheap.
You may be lucky to score a used set of Brembo's from RBS or maybe eBay for a more reasonable price.
__________________
1998 DL LTD in Sparkling Burgundy, daily, mild 5.0L, high end stereo, slow'n'thirsty - 138.8rwkw. 2006 BF GT-P in Ego, 5.8L all alloy, Kenne Bell 2.8HLC, Nizpro Stage 2 ZF - 440rwkw. 2008 SY F6X in Silhouette, Ford Performance Club of ACT |
||
16-07-2013, 02:49 PM | #227 | |||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Fremantle W.A
Posts: 661
|
Quote:
__________________
Losing my patients with unfinished threads Did the ideas people helped you with work or not! |
|||
17-07-2013, 09:13 PM | #228 | ||
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
Hi,
Does anyone know whether the Lenso D1R 18x9 will fit over brembo 4 piston front? What's the biggest offset without fouling on the guard?
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
17-07-2013, 09:31 PM | #229 | |||
GT-P With An Ego
Join Date: Feb 2005
Location: Canberra
Posts: 20,845
|
Quote:
Speedy Cobalt in 18x8 will fit (one of the few 18" that will).
__________________
1998 DL LTD in Sparkling Burgundy, daily, mild 5.0L, high end stereo, slow'n'thirsty - 138.8rwkw. 2006 BF GT-P in Ego, 5.8L all alloy, Kenne Bell 2.8HLC, Nizpro Stage 2 ZF - 440rwkw. 2008 SY F6X in Silhouette, Ford Performance Club of ACT |
|||
17-07-2013, 09:45 PM | #230 | ||
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
hmm, I rang wheelworx today and they told me otherwise
Shame, they're a nice 5 spoke which I think suit AU/BA utes ... and Speedy Cobalts are just so ugly
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
17-07-2013, 10:06 PM | #231 | ||
GT-P With An Ego
Join Date: Feb 2005
Location: Canberra
Posts: 20,845
|
I was just after an 18 for cheap(er) semi-slicks. care not for looks.
__________________
1998 DL LTD in Sparkling Burgundy, daily, mild 5.0L, high end stereo, slow'n'thirsty - 138.8rwkw. 2006 BF GT-P in Ego, 5.8L all alloy, Kenne Bell 2.8HLC, Nizpro Stage 2 ZF - 440rwkw. 2008 SY F6X in Silhouette, Ford Performance Club of ACT |
||
This user likes this post: |
17-07-2013, 10:12 PM | #232 | ||
Regular Member
Join Date: Aug 2012
Posts: 233
|
I just got a set of enkei pf01 in 18" that will fit brembos. Autotechnik do them for about $1600-$1700, I got mine from tirerack with some tyres tho.
Also saved 18.5kgs over stock wheels!! |
||
17-07-2013, 10:39 PM | #233 | |||
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
Quote:
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
|||
2 users like this post: |
17-07-2013, 10:44 PM | #234 | ||
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
your car was used on the wheel deals FB site
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
2 users like this post: |
18-07-2013, 09:39 AM | #235 | ||
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
Are Starcorp Impuls' brembo compatible?
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
18-07-2013, 01:52 PM | #236 | ||
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
just rang tempetyres and theyre convincing me the lenso D1R 18" 18x9 will fit Brembos. Anyone confirm for sure?
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
04-08-2013, 06:11 AM | #237 | ||
Regular Member
Join Date: Feb 2010
Posts: 64
|
|
||
15-08-2013, 12:23 PM | #238 | ||
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
28-08-2013, 03:52 PM | #239 | ||
Starter Motor
Join Date: Aug 2013
Posts: 8
|
anyone tried 19x8.5 adv.1 5.1 wheels?
|
||
30-08-2013, 01:43 PM | #240 | ||
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: QLD
Posts: 1,515
|
Is it safe to assume that wheels that clear 4 piston brembos will clear 6 piston also?
__________________
FG XR6T Ute
300rwkw |
||