|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-09-2024, 05:24 PM
|
#1 | ||
|
Diesel Motor
Join Date: Mar 2015
Posts: 58
|
Hi guys,
I have a 2011 Ford Focus TDCi LV 6MT. Just wondering if anyone has any ideas which is the right gearbox oil spec for this model? There seems to be a bit of contradictory between resources. On the workshop manual for Focus LV, it says its WSS-M2C200-D2. But on the service guide booklet it says its WSD-M2C200-C. This spec is also found on LT I understand that WSD-M2C200-C is a GL-4 75W-90 and WSS-M2C200-D2 is a thinner spec, GL-4 FE 75W. Does anyone know if the D2 can really be used without problems? Thanks
__________________
2011 Ford Focus TDCi 2.0L 6sp MT |
||
|
|
|
08-09-2024, 09:59 AM
|
#2 | |||
|
Moderator
  
Join Date: Jun 2006
Location: Foothills of the Macedon Ranges
Posts: 18,581
|
Quote:
I suspect the lower viscosity WSS-M2C200-D2 oil is used in colder climates. |
|||
|
|
|
08-09-2024, 10:08 AM
|
#3 | ||
|
Chairman & Administrator
 
Join Date: Dec 2004
Location: 1975
Posts: 107,288
|
In terms of LV Focus models:
I'm assuming you mean the MMT6 (6-speed) manual transmission which from the sources I have was specified to use WSS-M2C200-D2 spec oil. Some markets also got the M66 (6-speed) manual and it uses WSS-M2C200-C3 spec oil. The LT Focus, as you noted also got the MMT6 but was specified as WSD-M2C200-C spec but the MMT6 in the LW Focus was specified as either WSS-M2C200-D2 or 7U7J-M2C200-BA - the latter being another 75W GL-4. Frankly, you can use either. The reason for the change seems to be twofold - in warmer climates the D spec offers improved shift quality and it also aids in economy (thus the FE nomenclature).
__________________
 Observatio Facta Rotae
|
||
|
|
|
| This user likes this post: |
|
08-09-2024, 10:26 AM
|
#4 | ||
|
Diesel Motor
Join Date: Mar 2015
Posts: 58
|
Thanks all for your responses. Yes, I only thought of using the D2 spec because last year, I changed the gearbox oil and I used a Nulon M2C200-C spec. After that, I noticed that its become hard to shift to reverse every time, even before winter. 1st and 2nd can also be touchy when engine is cold. I live in Southwest WA. A lot of people at TalkFord.com recommend the D spec for people experiencing hard shifts.
I have got 2 1L bottles of Castrol Transmax FE 75W and will upgrade to this as soon as I can and see if it will make shifting to reverse gear better.
__________________
2011 Ford Focus TDCi 2.0L 6sp MT Last edited by RadioactiveX; 08-09-2024 at 10:33 AM. |
||
|
|
|
|
08-09-2024, 01:03 PM
|
#5 | ||
|
Moderator
Join Date: Jun 2006
Location: Foothills of the Macedon Ranges
Posts: 18,581
|
Agree, if you are already using the M2C200-C spec and finding difficulty in shifting especially when cold, then try the Transmax Manual FE 75W oil, which complies with Ford WSS-M2C200-D2
|
||
|
|
|
Right Gearbox Oil for manual TDCi models?
Linear Mode
