Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 13-10-2015, 05:31 PM   #1
Ozigoo
Regular Member
 
Join Date: Jan 2015
Posts: 30
Default Can someone look at the front of their 08 Mondy and tell me...

Hi, Hit a kangaroo and smashed the front of my 08 Mondeo MA Tdci.
I've installed all the new/second hand parts and have 1 thing I cant work out..
The front airbag sensor? I have it on the end of its cable but cant see where
it attaches to the car?
Can someone have a look and tell me plse, its got me really baffled ...
cheers
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto
Ozigoo is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2015, 12:00 PM   #2
Ozigoo
Regular Member
 
Join Date: Jan 2015
Posts: 30
Default Re: Can someone look at the front of their 08 Mondy and tell me...

The workshop manual doesnt show it so wondering if someone can take a look? I just found this picture of a MK 4 Petrol location ..Is this the same as the Diesel? and which way up does it bolt on?...
http://www.talkford.com/community/to...-crash-sensor/



cheers guys
Attached Images
File Type: jpg airbag sensor.jpg (32.9 KB, 15 views)
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto
Ozigoo is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2015, 04:52 PM   #3
rondeo
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 805
Default Re: Can someone look at the front of their 08 Mondy and tell me...

Nearest thing I can see in the manual is in a wheel arch.
Attached Images
File Type: jpeg graphic_024.jpeg (58.6 KB, 24 views)
rondeo is offline   Reply With Quote Multi-Quote with this Post
Old 15-10-2015, 09:15 AM   #4
Ozigoo
Regular Member
 
Join Date: Jan 2015
Posts: 30
Default Re: Can someone look at the front of their 08 Mondy and tell me...

Thanks Rondeo but the wire wouldnt reach that far,Ill check again today cheers
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto
Ozigoo is offline   Reply With Quote Multi-Quote with this Post
Old 15-10-2015, 09:59 AM   #5
rondeo
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 805
Default Re: Can someone look at the front of their 08 Mondy and tell me...

Another graphic.
Attached Images
File Type: jpeg graphic_027.jpeg (55.9 KB, 19 views)
rondeo is offline   Reply With Quote Multi-Quote with this Post
Old 15-10-2015, 01:47 PM   #6
rondeo
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 805
Default Re: Can someone look at the front of their 08 Mondy and tell me...

On my 2010 MC I can see the torx head bolt roughly in the middle as in the photo.

Last edited by rondeo; 27-01-2018 at 11:23 AM.
rondeo is offline   Reply With Quote Multi-Quote with this Post
Old 16-10-2015, 01:50 PM   #7
Ozigoo
Regular Member
 
Join Date: Jan 2015
Posts: 30
Default Re: Can someone look at the front of their 08 Mondy and tell me...

thanks guys, found the spot in the same place as my first linked post...
Top and behind the rad support frame..Theres some holes to take the little plastic sticky out bits and a nut welded on to take the torx screw, it really can only go on one way to suit all the holes...cheers for the support much appreciated
__________________
2008 Mondeo MA TDCi 6 speed Aisin Auto
Ozigoo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:24 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL