Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 30-10-2015, 01:26 AM   #1
stazza
FF.Com.Au Hardcore
 
stazza's Avatar
 
Join Date: Nov 2008
Posts: 1,422
Default Dynamat/Soundproofing

Anyone here soundproofed their car?

I got a ton of road noise in my GS with the 20" wheels and firm suspension. Considering sound proofing it. Has anyone done this, and is it much of a difference from the stock sound deadening?
__________________
2011 SILHOUETTE FPV GS 315 #0275
20x10", 20x8.5" Lenso D1R's
Pedders XA Coilovers
Brembo 4/1
Pacemaker 1" 7/8 Headers
Twin 3" Stainless Manta Catback
XFT Built Motor
XFT Custom Surge Tank
XFT Stage 3 ZF
Final Drive Chromoly Tailshaft
KPM Twin Air Filter
KPM Stage 2 Intercooler
KPM Twin Throttle Body
2.6L Kenne Bell on E85
BlueStreak Circle D Converter
900+ rwhp thanks to Xtreme Ford Tuning
stazza is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 12:09 PM   #2
PG2
#neuteredlyfe
Donating Member2
 
PG2's Avatar
 
Join Date: Apr 2012
Posts: 10,464
Default Re: Dynamat/Soundproofing

"MADAYA" is the one to speak to about this - he is a regular on these forums.

Try this thread if you haven't already read it;

http://www.fordforums.com.au/showthread.php?t=11373716

There was some sort of discussion in the FG to FGX section but I can't find it at the moment.

I have sound deadened the outer skin of my doors. I noticed an immediate difference to the sound level in the car, however, I have become used to it over time and don't really notice it anymore.

A good side effect of sound deadening the doors is that it does improve the sound system (more than you would think). Another side effect is that your doors feel more solid when you close them. If you have a sub woofer in the rear parcel shelf (which I don't) the sound deadening on the rear parcel shelf also improves the sound system as well.
PG2 is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 12:15 PM   #3
Tonz
FF.Com.Au Hardcore
 
Join Date: Jun 2011
Location: Pt Lincoln far side South Oz
Posts: 5,732
Default Re: Dynamat/Soundproofing

Agree with PG2.

Immediately noticed BIG difference in my BF ute but 12/18 months down the track thinking it sounds noisy again. Nothing has come off you just get used to it.
MADAYA used both sound deadening and sound ???? I only used sound deadening stuff. Read his various threads/posts.
__________________
Dont p i s s off older people. At our age the term Life in Prison is not a deterrent
Tonz is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 12:21 PM   #4
PHANTMXR6
It's not an FG MKI.......
 
PHANTMXR6's Avatar
 
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,426
Technical Contributor: For members who share their technical expertise. - Issue reason: Willing to help out with useful advice in the technical areas of the forum. 
Smile Re: Dynamat/Soundproofing

Yep. Did my car when it was 6 months old.

I didn't use Dynamat, however. Couldn't justify the price.

I used a similar product I bought of ebay.

Took me 8 hours to strip the interior, apply the soundproofing material and refit the interior.

I covered, outer door skins, inner door skins, b pillar, c pillar, parcel shelf top and bottom, whole boot well, bootlid and the whole floor of the car I used some additional traditional sound proof matting.

The only panel I didn't do was the roof under the roof lining. I wish I had now, as the only external noise that I get more of is wind noise from the roof area.

Well worth the effort, not only to decrease external road noise, but to enhance the listening experience if you have upgraded the stereo.
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG...

Want to know how to do an A Service for an FG XR6T?

Look in this http://fordforums.com.au/showthread.php?t=11339404

Thinking of oil sampling your engine?

Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample
PHANTMXR6 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-10-2015, 12:42 PM   #5
mcnews
Trev
 
mcnews's Avatar
 
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
Technical Contributor: For members who share their technical expertise. - Issue reason: Trev has owned several boosted fords and has really contributed a lot of info on them. His posts in the bike section are also very helpful. I think he should be recognised as a technical contributor. 
Default Re: Dynamat/Soundproofing

Had my floor, doors, boot and bootlid done in dynamat when I had the new speakers etc. put in. I guess it helps, hard to know without doing a real study back to back, when I got the audio upgrade that was blasting out too much to really study the difference in reduced road noise etc.
__________________
Trev
(FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension)
mcnews is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 01:33 PM   #6
The Yeti
FF.Com.Au Hardcore
 
The Yeti's Avatar
 
Join Date: May 2006
Location: In my happy place
Posts: 5,432
Default Re: Dynamat/Soundproofing

I used a Dynamat type product (no brand on it) I got from one of the advertisers on this forum, was less than half the price of Dynamat

I used it on the 38 as the heat that came through the floor was crazy

It cut a lot of the noise down and made quite a difference in the cabin temp

and it was a piece of **** to work with
__________________
Pariahs C.C.
What could possibly go wrong

I post images with postimg.cc (so I don’t forget)
The Yeti is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 01:44 PM   #7
Trump
bitch lasagne
 
Trump's Avatar
 
Join Date: Aug 2012
Location: Sonova Beach
Posts: 15,110
Default Re: Dynamat/Soundproofing

My efforts with the FG when I had it:

http://fordforums.com.au/showthread....uilders&page=2

Oh and to the OP, what tyres are you running? They make a world of difference to road noise.

Last edited by Trump; 30-10-2015 at 01:50 PM.
Trump is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 03:22 PM   #8
MattSAU2XR8
Regular Member
 
Join Date: Oct 2010
Location: Perth
Posts: 391
Default Re: Dynamat/Soundproofing

If you do go ahead and dynomat the car it'd be interesting if you could run a test using an iphone decibel meter or similar. I'm not sure if this would work or show a difference but what you could try is:
- Get a mate to help you, i.e. position phone
- Run the car at a constant speed at a particular location on a coarse chip freeway, i.e. note the reading at a particular way point, eg. a tree or a bridge, or perhaps five different points, and write them down,
- And also try with the phone in different locations, eg. console lid, side of driver's headrest, rear passenger seat
- Then fit the dynomat and repeat
- If you got a 3 dB average drop this would be quite impressive!
MattSAU2XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 03:31 PM   #9
Silver Ghia
Moderator
Donating Member3
 
Silver Ghia's Avatar
 
Join Date: Jun 2006
Location: Foothills of the Macedon Ranges
Posts: 18,502
Technical Contributor: For members who share their technical expertise. - Issue reason: As Silver Ghia his contributions to the AU and BA technical areas have been of high quality and valuable to the member base. 
Default Re: Dynamat/Soundproofing

I only dynamatted the rear shelf which made the rear of the car much quieter. I think the undeadened shelf acts like a drum. Not doing anything more.
So I suggest to start there.
Silver Ghia is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-10-2015, 04:20 PM   #10
sixman
Regular Member
 
sixman's Avatar
 
Join Date: Jul 2013
Location: Hills District
Posts: 424
Default Re: Dynamat/Soundproofing

I have done the doors, parcel shelf, boot well and boot liner.
Definitely made a difference for me.

Still notice noise from the floor, and particularly from behind the dash /firewall and the transmission tunnel. Thinking of doing these next.
__________________
FG MkII XR6T Limited Edition Manual
Bilstein shocks, SuperPro Bushes, MalWood Shifter
Front tyres: Goodyear Eagle F1 A2 245-35-19
Rear tyres: Toyo R888 265-30-19
3.5inch custom exhaust with imitation stock tip, PW Stage 2 cooler (black), ID 1000, XCAL3, Plazmaman intake, Herrod Spark Booster
BorgWarner EFR 9174
Autotech 420rwkw
sixman is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 06:09 PM   #11
Itsme
Experienced Member
 
Itsme's Avatar
 
Join Date: Sep 2006
Location: Australasia
Posts: 7,476
Default Re: Dynamat/Soundproofing

I did the back cabin wall of my FG ute, made a big difference to road noise emanating from the rear, worth the effort.
Itsme is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2015, 06:47 PM   #12
Tonz
FF.Com.Au Hardcore
 
Join Date: Jun 2011
Location: Pt Lincoln far side South Oz
Posts: 5,732
Default Re: Dynamat/Soundproofing

yep but watch out for the slots that I believe would channel the air flow for air con
__________________
Dont p i s s off older people. At our age the term Life in Prison is not a deterrent
Tonz is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 31-10-2015, 02:20 AM   #13
stazza
FF.Com.Au Hardcore
 
stazza's Avatar
 
Join Date: Nov 2008
Posts: 1,422
Default Re: Dynamat/Soundproofing

Quote:
Originally Posted by Loud_Noises View Post
My efforts with the FG when I had it:

http://fordforums.com.au/showthread....uilders&page=2

Oh and to the OP, what tyres are you running? They make a world of difference to road noise.
Thanks man. Cheap **** lexani tyres. Thing is on the coarser bitumen it is so load I can't really talk to anyone on the Bluetooth setup.

Thanks everyone. Advice taken on board.
__________________
2011 SILHOUETTE FPV GS 315 #0275
20x10", 20x8.5" Lenso D1R's
Pedders XA Coilovers
Brembo 4/1
Pacemaker 1" 7/8 Headers
Twin 3" Stainless Manta Catback
XFT Built Motor
XFT Custom Surge Tank
XFT Stage 3 ZF
Final Drive Chromoly Tailshaft
KPM Twin Air Filter
KPM Stage 2 Intercooler
KPM Twin Throttle Body
2.6L Kenne Bell on E85
BlueStreak Circle D Converter
900+ rwhp thanks to Xtreme Ford Tuning
stazza is offline   Reply With Quote Multi-Quote with this Post
Old 31-10-2015, 05:12 AM   #14
supershifty
Missing a sock...
Donating Member3
 
supershifty's Avatar
 
Join Date: Mar 2012
Location: Brisbane 4017
Posts: 8,250
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Dave has been a long time active member on the forums and in particular has been a busy volunteer whenever there are cruises and toys runs etc held in South East Qld. He actively gives up his time and ensures that the events are provided for, be it commun 
Default Re: Dynamat/Soundproofing

Madaya (Gaz) even did the hood lining in his ute, and the under bonnet, I can vouch for the quietness of his ride - I've driven it.

He's pretty rectal about his stuff. Not tinny at all like most utes are.

Cheers!
__________________

Real friends + great times = sheer bliss!

Considering becoming an organ donor? Click here

QLD Events, Cruises and Get Togethers: Click here

Gain success instantly - lower your standards.

It's not government funded - it's taxpayer funded.

Last edited by supershifty; 31-10-2015 at 05:20 AM.
supershifty is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 03:49 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL