Got my Shaker - now what do ya rekon to do... - Page 3

4Vman · 10-12-2005, 01:33 PM

Its a simple mathematical equation:

BA/F GT + SHAKER = RICE.

HLC · 10-12-2005, 03:06 PM

black shaker with silver stripes.

get a fibreglass or carbon bonnet from AWC. whichever is cheaper. and get it painted. thus saving your original bonnet.

GT595 · 10-12-2005, 07:54 PM

I have just finished cutting the hole in the bonnet!!!! Pretty scary procedure but all went well - so its too late I now have a ricer BAGT and I love it...... :thebirds: and thats all that matters to me!!!

: thanks for all the feedback - it has been funny as reading all this....
The glue is still setting on the bonnet ring so the photos will be up 2morrow arvo once it is all on and the car is clean.....Looks good the black with the Blueprint too.....
Damo

**Falcon Coupe** · 10-12-2005, 08:26 PM

Quote:

Originally Posted by rob_liss_lms10

:
Please tell that to all the people who stop me and want to have a look at my car + shaker and beg me to Rev the car so they can see it Shake....also might want to pass on a note to all the Ford people at various Ford shows that take roll after roll of photos of BA/AU's with shakers installed....Me thinks you may be laughing on your own

Lissa The female half of Rob_ liss Yes i do have my own opinion :newangel:

Listed under your own thread Rice citation in Exterior mods :

Quote:

Fake air dam and/or vent(s)

http://www.fordforums.com.au/showthread.php?t=27880

:hihi:

galaxy xr8 · 10-12-2005, 09:45 PM

Quote:

Originally Posted by GT595

I have just finished cutting the hole in the bonnet!!!! Pretty scary procedure but all went well - so its too late I now have a ricer BAGT and I love it...... :thebirds: and thats all that matters to me!!!

: thanks for all the feedback - it has been funny as reading all this....
The glue is still setting on the bonnet ring so the photos will be up 2morrow arvo once it is all on and the car is clean.....Looks good the black with the Blueprint too.....
Damo

Great stuff mate.

SpoolMan · 10-12-2005, 11:23 PM

Quote:

Originally Posted by GT595

I have just finished cutting the hole in the bonnet!!!! Pretty scary procedure but all went well - so its too late I now have a ricer BAGT and I love it...... :

Well done, i was a skeptic of the BA shaker until i seen it on a car and Paul the guy who got the concept going took us for a 20 min drive...
it does put extra air into your air box, but thing i liked the most was it kept the plenum chamber cool, after the 20 min drive we put our hand on the plenum it was cool... The Boss likes it cool..

rob_liss_lms10 · 10-12-2005, 11:33 PM

Listed under your own thread Rice citation in Exterior mods :

Quote:
Fake air dam and/or vent(s)

Interesting falcon Coupe that you follow my previous threads to find that post in my club forum, but yet you failed to miss my numerous posts on exactly how my shaker is plumbed into the air box, thus your whole fake air dam and/or vents rice theory is either lack of attention on your behalf, or just plain ignorance.

thunderoo · 10-12-2005, 11:35 PM

Something like this ?? If anybody wants to see me do a hot lap around Wakefield Park...just PM me ....

**Falcon Coupe** · 10-12-2005, 11:46 PM

Quote:

Originally Posted by rob_liss_lms10

Listed under your own thread Rice citation in Exterior mods :

Quote:
Fake air dam and/or vent(s)

Interesting falcon Coupe that you follow my previous threads to find that post in my club forum, but yet you failed to miss my numerous posts on exactly how my shaker is plumbed into the air box, thus your whole fake air dam and/or vents rice theory is either lack of attention on your behalf, or just plain ignorance.

Ohh, excuse my ignorance, now i know it's a real AU GT it's all good.

rob_liss_lms10 · 10-12-2005, 11:49 PM

ok so now it's settled...say no more.

:

Blue Oval Mopar Man · 11-12-2005, 03:05 AM

Quote:

Originally Posted by Falcon Coupe

Ohh, excuse my ignorance, now i know it's a real AU GT it's all good.

Do I detect a just a hint of sarcasm there Coupe ?

FPV GT · 11-12-2005, 06:25 PM

Quote:

Originally Posted by Falcon Coupe

Not just look wong, but they are non functional which means rice.

Bzzzzzzzzzz
Unfortunately you are wrong.
I drove mine before shaker and obviously now. I noticed the difference.
So as not to be "fooled" I had before and after readings taken. The proof is on the paper with all the numbers and squiggly lines.

Regards
Paul

FPV GT · 11-12-2005, 06:27 PM

Quote:

Originally Posted by 4Vman

Its a simple mathematical equation:

BA/F GT + SHAKER = RICE.

Your entitled to your opinion.

Its a shame that mathematics is not not your forte.

Thats my opinion.

Regards

Paul

**Falcon Coupe** · 11-12-2005, 06:31 PM

Whatever mate i'm over it, my last word on this is : The only Falcon that a shaker belongs on is an XY.

Buddykin · 11-12-2005, 06:38 PM

^ Agree

Perun · 11-12-2005, 07:09 PM

Each to their own guys. We can't tell other people how to live their lives. The secret to a happy life is to respect other people's decisions and let them do what they think is best. I'm all for freedom of expression, but saying something like "your car is crap, you've got taste in your a**e, you should listen to me" isn't really on. Way off topic, I know, but I'm just trying to bring some sense into this "shaker vs no shaker" debate.

Sourbastard · 11-12-2005, 07:19 PM

The shaker originally came out on the 1969/70 mustang, specifically the boss 302's, it was then selected for the XY later on in the 70's(along with the rear spoiler design). Its the only two cars a shaker belongs on in my opinion.

You can attach whatever you want to a B series GT, but it wont make it unique as the cars mentioned above. What made them special was Homologation, their success on the track, their elevation to a near legend to the ford community. 3 Things that the B series GT's have not achieved, and wont achieve unless the current premier racing series changes dramatically.

FPV GT · 11-12-2005, 09:54 PM

I guess if people want the shaker left to the good "ole cars"
They will be against
Stripes and
the terminology GT

Regards
Paul

NAK302 · 11-12-2005, 09:56 PM

[QUOTE=sourbastard]The shaker originally came out on the 1969/70 mustang, specifically the boss 302's, it was then selected for the XY later on in the 70's(along with the rear spoiler design). Its the only two cars a shaker belongs on in my opinion.
QUOTE]

slightly incorrect. the shaker was for any 69/70 mustang with a 351 or larger capacity. the option was unavailable on 1969 boss 302 but available on 1970 boss 302.
and your last sentance should be law

:

NAK302 · 11-12-2005, 09:58 PM

Quote:

Originally Posted by FPV GT

I guess if people want the shaker left to the good "ole cars"
They will be against
Stripes and
the terminology GT

Regards
Paul

naah my stripes were fitted as part of the "GT" package

:

Sourbastard · 11-12-2005, 10:12 PM

Quote:

Originally Posted by FPV GT

I guess if people want the shaker left to the good "ole cars"
They will be against
Stripes and
the terminology GT

Regards
Paul

Now dont sulk, its not becomming, and the tear stains will ruin the leather seats.

galaxy xr8 · 11-12-2005, 10:15 PM

There was a Silver BA GT at the show today in Geelong and it had the Black stripe's and a black shaker which complemented the vehicle, it was exactly what I wanted, a silver GT with black stripe's and a shaker, mmmmmm.

4Vman · 12-12-2005, 12:15 AM

Quote:

Originally Posted by FPV GT

Your entitled to your opinion.

Its a shame that mathematics is not not your forte.

Thats my opinion.

Regards

Paul

Obviously intelligence isn't yours either....

:

Thats MY opinion....

I bet you've still got a mullet and listen to CCR...

Abacus · 12-12-2005, 02:29 PM

Quote:

Originally Posted by 4Vman

I bet you've still got a mullet and listen to CCR...

Don't knock the mullet!!

SpoolMan · 12-12-2005, 04:23 PM

Everyone has there say...
GT595 if you want to show the finished job, i suggest the show & Shine Forum.