Wheels That Fit Brembo Brakes

[raised by monkeys]

can anyone tell me what these wheels are? Are they Koya drift tek's?
Onyone know if koya 18" with a +25 will get over 4piston brembos on a BF ute?

[raised by monkeys]

^ its ok I found them. Well outside my price range anyways ha http://www.ssr-wheels.com/gallery/category/SP1.aspx

[shaine71]

Will brembo 4 pots (rears)fit over VERTINI DRIFTS 20x10 +35 offsets

[PHANTMXR6]

I can confirm that King Wheels Matrix style rims in 19" will clear 6 piston Brembos on an FG. I test fitted a rim today and there is plenty of room.

For those interested here's a link.

http://www.kingwheels.com.au/index.p...product_id=133

I'll post a couple of pics once tyres are fitted to the rims and fitted to the car.

[nelsonian101]

Originally Posted by raised by monkeys

can anyone tell me what these wheels are? Are they Koya drift tek's?
Onyone know if koya 18" with a +25 will get over 4piston brembos on a BF ute?

image

Koya make custom offsets don't they?

Looks like a lot of dish to Clear Brembos on a Falcon though.

[PHANTMXR6]

King Wheels Matrix. 19x8 35+ offset. Does clear 6 piston Brembo front and 4 piston rear. Front 355mm, rear 330mm.
Looks surprisingly better than I expected.

[JC]

Closely related to the King Matrix are the Icon Zest. Mine are 19 x 8.5 32P offset front, and 19 x 9.5 35P offset rear, and they clear the 6/4 brembos easily - at least 15mm clearance for each rim.

[mjrstar]

Any ideas how an ANZ RG 18x8.5 30p will go over 4 pots (and front guard clearance) on an FG ute.

These things clear EVO brembos with ease.. they are a copy of the ADVAN RG II which also seem to have healthy spoke clearance.

http://images.trademe.co.nz/photoser.../347453340.jpg

Problem is they are the far end of the country.

[JC]

To give an idea of the clearance on the Icons, I took a few close up pics:

Front (around 10mm clearance at 8.5" wide, 32P offset)


Rear (around 20mm clearance at 9.5" wide, 35P offset)

[kboot6]

Originally Posted by apolloxbgt

D1r lensos over the 4 pots on my f6.
image

Are these 18s or 20s
wandering if d1r 18s will fit over 4 pots

[raised by monkeys]

Originally Posted by kboot6

Are these 18s or 20s
wandering if d1r 18s will fit over 4 pots

this gave me a headache trying to find this out. I don't think they do though, but factors which may depend on this include offset and wheel width. If Lenso made a 19" it would relieve so many tension headaches.

[kboot6]

Originally Posted by raised by monkeys

this gave me a headache trying to find this out. I don't think they do though, but factors which may depend on this include offset and wheel width. If Lenso made a 19" it would relieve so many tension headaches.

I saw the fg down lower who has them but lenso told me they wouldnt and i want them but i dont want 20s. As you say 19s would be cool.
18x9 +25
18x10+22

[raised by monkeys]

If lenso say no, id go with that

[MitchP91]

Would stance sc5 19x8.5 or 9.5 with 40p offset fit over 6pot brembos on a fg

Thanks
Mitch

[FLOORED]

Originally Posted by MitchP91

Would stance sc5 19x8.5 or 9.5 with 40p offset fit over 6pot brembos on a fg

Thanks
Mitch

Unless someone on here has used them i am unsure sorry mate but have you contacted the supplier to ask?

[BAGT514]

Advant Gardes M310's
20 x 8.5" +30's
245/35 Nitto Invo's
20 x 10" +45
305/25 Nitto Invo's

[kboot6]

These are lenso d1r I got fitted today
front 18x9 +15. 245/40
Rear 18x10 +22. 265/35
They fit over 4 pot brakes.
Its standard fpv height and the rears are rubbing on the guard lip so i might have to get them rolled and the fronts i might change to 235 if i can get enough rolled on the front.

[al10s]

bagt154,did the 305 nitto s fit without guard modification.Looks great,by the way.

[BAGT514]

Originally Posted by al10s

bagt154,did the 305 nitto s fit without guard modification.Looks great,by the way.

There is no guard rolling at all. Just the KPM control blade relocation kit

Mine is on Tien coil overs wound down

Shane

[al10s]

It sits great,fills out the guards nicely

[neasfox9]

Originally Posted by BAGT514

FG - PBR's - DR1's
image
image

They are pretty close though. This has 275/30/20's on the rear

Hey bud! Im set on putting some 20×10 D1Rs on my 2011 GT-P, you reckon you could link me to these PBR brakes you guys are talking about?

[d00bs]

I can confirm that rota grid rims clear 4 pot brembos on the front and 4 pot brembos on the rear in the following sizes:
Front
Grid 18x8.5+30
Rear
Grid R 18x9.5+35



As you can see I'm using the BA/BF bracket on the front, if you want to swap or sell me a set of FG brackets I'd be super keen.

[Ride]

Originally Posted by d00bs

I can confirm that rota grid rims clear 4 pot brembos on the front and 4 pot brembos on the rear in the following sizes:
Front
Grid 18x8.5+30
Rear
Grid R 18x9.5+35

image

As you can see I'm using the BA/BF bracket on the front, if you want to swap or sell me a set of FG brackets I'd be super keen.

Are they lightweight/forged by any chance? Looking for a cheap set of 18's that will clear Brembos and reduce unsprung weight.

[d00bs]

They are lighter than factory 19" wheels, but they are still cast, and are still somewhat heavy.
If I had the coin I would have got the original rays wheels, quality wise though the rotas have been good so far.

[FLOORED]

We have just supplied one of our new Australian made 6 piston 362mm brake kits for BA BF models that fit behind factory 18" wheels or larger. The caliper face sits far back and the outer face of the caliper sits flush with the rim mounting face of the disc rotor so should fit every factory 18" or larger rim with clearance. The kit has been fitted and checked and we sold our first kit to a customer yesterday who will also test himself and fit it himself and give us some feedback. The car and brake kit should be able to be viewed at the all ford day at Eastern Creek on Sunday the 19th of this month if all goes well. Stay tuned and also keep an eye out for the FG version.

[XR23IL]

Photos?

[FLOORED]

Originally Posted by XR23IL

Photos?

Just working on that.

[FLOORED]

Vari 6 piston 362mm Factory clearance kit
The kit here is the VARI 362mm 6 piston kit and the caliper is made here in Australia and runs an internal dust seal (like AP Racing) and not external dust boots. The brake kit was fitted behind a 18" factory wheel with plenty of clearance and we should be able to do a smaller rotor as well. The kit is being tested on a BF ford and has had no issues at all. The rotors are available in 1 piece or 2 piece and will have 10 holes in the mounting pcd as we use the rotors for two different vehicles and brake kits which is not a problem because Audi and Subaru amongst others do the same thing. The front brake kits will sell for around the $2500 with a 1 piece disc and a 2 piece will be worked out later.
We will be checking it for FG vehicles and also checking for more wheel clearances with some help from our Ford customers.

[jamess]

Can someone post a photo of these 18" wheels that fit over Brembos?

Originally Posted by Lightning Strike GT

Brett What I found out - the hard and expensive way - when I put the big red hats on the BF XR8
I borrowed a few 18 and 19 FORD wheels from mates, neighbours a few in the club- a wrecker was only to happy to help out as well
BA XR 18 - yes
BF XR 18 - no
FG XR 18 - no
FG 19 XR option - no
FG 50th ann - no
FG G6E 18 - no
FG G6E turbo 19 - no
The only FORD (non FPV) wheel that will clear them is the ENKEI BA XR option series in 18 X 8 - all other B / F series non FPV will not fit end of story
All B and F series FPV wheels in 18" and 19" will fit as well as the Territory FX6 wheels
Sorry forgot to add The 18" Tickford Azzuro and the 18" Tickford Pursuit wheels fit - the AU series 18" Tickford Rebel wheels I am unsure of I did not test these
Hope this sheds a bit of light on things

[FormulaFG]

Originally Posted by jamess

Can someone post a photo of these 18" wheels that fit over Brembos?

Pretty sure its these:

BA XR8 18 inch