|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
01-02-2021, 04:05 PM | #1 | ||
Starter Motor
Join Date: Jan 2021
Posts: 5
|
Hi all
I recently had the leak off pipes replaced due to one leaking (which ultimately caused a small fire under the bonnet ). A certified reputable mechanic did this replacement . Unfortunately the leak off pipes keep popping out , it’s not always the same one . The clips are new also, also no pressure issues . Has anyone had this problem and been able to solve it . I can’t really drive it as you never know when one is going to pop out . 2010 mondeo titanium tdci . |
||
02-02-2021, 09:19 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 805
|
Metal cips or green plastic tabs?
They changed sometime in 2010 I gather. http://www.catcar.info/ford/?lang=en...ODg4OCsxMzM%3D shows (9A317) a metal clip. These potentially get weaker by over extension when installing. Solution might be to bend them back a bit. They should be installed before the leak off pipe is pressed in. Another idea is to cable tie them in as emergency backup. I googled it out of interest, no problems with mine, plastic tabs. |
||
02-02-2021, 09:30 AM | #3 | ||
Starter Motor
Join Date: Jan 2021
Posts: 5
|
They are the metal clips
|
||
Thread Tools | |
Display Modes | |
|