![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Ryna
Join Date: May 2006
Location: Perth WA
Posts: 17
|
my engine is being rebuilt, in pulling it apart we discovered it was already 40 thou over, but the bores were screwed and pistons had chips at the top.
so it is going to be bored out to 60 thou, and new ACL flat tops put in. also bottom end balanced, crank grind and balanced, clutch balanced, lighten flywheel. then the head will have a service which includes hardened seats for unleaded all up the quote is about $1200 do you rekn its a good price? |
||
![]() |
![]() ![]() |