Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 14-10-2012, 04:50 PM   #1
Road_Warrior
Pity the fool
 
Road_Warrior's Avatar
 
Join Date: Jan 2007
Location: Wait Awhile
Posts: 8,997
Question AC 240V charging question

I plugged in my camping lantern to recharge it (it's an Arlec RDL2 for reference) and after a while checked back to see how it was going.

The side of the lantern (not switched on during charging) was very bloody hot. I've never noticed this before.

I unplugged it from the charger, and picked up the charger/transformer and the back of it was so hot I almost burnt myself. I unplugged the charger itself and even now having had 1/2 an hour to cool down it is still very warm.

The charger is not the one for that lantern, but the input-output is the same. Now here's the funny thing, I went and dug out the charger that came with the lantern, and not only is the input-output the same (12V DC @ 500mA) it is from the same manufacturer and has the same part number!

So I've now got it charging on the Arlec charger to see what happens. Do I have a dud charger or is something in the lantern stuffed? Something tells me its the latter...

__________________
Fords I own or have owned:

1970 XW Falcon GT replica | 1970 XW Falcon | 1971 XY Fairmont | 1973 ZG Fairlane | 1986 XF Falcon panel van | 1987 XFII Falcon S-Pack | 1988 XF Falcon GLS ute | 1993 EBII Fairmont V8 | 1996 XG Falcon ute | 2000 AU Falcon wagon | 2004 BA Falcon XT | 2012 SZ Territory Titanium AWD

Proud to buy Australian and support Ford Australia through thick and thin
Road_Warrior is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 06:37 PM   #2
2011G6E
FF.Com.Au Hardcore
 
2011G6E's Avatar
 
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
Default Re: AC 240V charging question

Quote:
Originally Posted by Road_Warrior
The charger is not the one for that lantern, but the input-output is the same.
...ahem...I think I've spotted the problem...

If the other charger is indeed "the same maker and same part number" then I would suspect one of them is a dud...
2011G6E is offline   Reply With Quote Multi-Quote with this Post
Old 15-10-2012, 10:12 AM   #3
zilo
BANNED
 
zilo's Avatar
 
Join Date: Jul 2012
Posts: 2,886
Default Re: AC 240V charging question

Some chargers have the center pin as positive, some have the center pin as negative.

something to watch out for.
zilo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:04 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL